Industrial drums are a natural fit for vacuums used for industrial duty applications due to often large amount of material to be collected. In addition, many times the drum is filled with materials that are to disposed of per local and federal government codes which has makes the vacuum drum lid assemblies profiled here so popular. The role of the drum top vacuum lid assembly often is to fill an industrial drum that is then capped off and the drum vacuum lid is moved to another drum. These vacuum units fit to the top of existing 30 and 55-gallon drums and can easily be relocated to another drum as the drum in use becomes full. Drum top vacuum lid assemblies are available as compressed air operated or with electric motors and vacuum performance will vary. Units are available with configurations and filtration packages per your application. Options include dry-only, wet-dry, 99.97% HEPA and vacuum separators are available. These lids are designed to stand up to demanding conditions. Please contact us if you have an application calling for a drum top air or electric operated vacuum.
| MDL55E, Dual Motor Electric Vacuum in Dry Only, Wet-Dry and Absolute Filtration |
 |
- Industrial drum vacuum with dual motor vacuum drum lid in dry-only and wet-dry.
- Air Flow: 210 SCFM, Vacuum Suction: 7.5-inches Hg, (102-inches Wg)
- Fitted with carbon-brush motors and durable filters.
- Individual motor starters to ease starting load.
- Lid features motor enclosure for noise reduction.
|
| Get more information about this product |
|
| N301B and N302B, Compressed Air Operated Vacuum Lid Assemblies, 30 Gallon Drum Top Vacuum |
 |
- Compressed air operated vacuum lid assembly for industrial applications,drum top vacuum.
- Single and dual venturi units available.
- Compressed Air Requirement: 68 SCFM @ 100 PSI; 0.75-inch air line.
- Air Flow: 89 SCFM, Vacuum Lift: 185-inches.
- Available with 1.5-inch inlet
|
| Get more information about this product |
|
| MDL55 Vacuum Lid Assembly in 30 Gallon and 55 Gallon |
 |
- Heavy duty and highly efficient compressed air vacuum lid for industrial drums.
- Compressed Air Requirement: 35 SCFM @ 60 PSI; 0.5-inch air line.
- Air Flow: 100 SCFM, Maximum Vacuum: 16-inches Hg, (208-inches Wg)
- Vacuum suction is adjustable from 8-inches Hg to 16-inches Hg.
- Lid is powder coated carbon steel and stainless steel is available; fitted with a 1.5-inch inlet.
|
| Get more information about this product |
|
| N551B and N552B, Compressed Air Operated Vacuum Lid Assemblies |
 |
- Compressed air operated vacuum lid assembly for industrial applications.
- Single and dual venturi units available.
- Compressed air requirements will vary based on venturi option selected.
- All steel construction with a 2-inch intake.
|
| Get more information about this product |
|
